AMBAR PLUS
PRESTRESSED CONCRETE
Standard Cuts
Medium to hard aggregates, even with high reinforcement.
Ø 600, 700, 800, 850, 900, 1000, 1100, 1200 & 1300
Standard and Silent
Wet cutting
ARCHER
GENERAL PURPOSE
Hard Materials
Reinforced concrete and any type of hard materials.
Ø 115, 125, 230, 300, 350 & 400
Dry and wet cutting
ARCHER
CORTE DE PAVIMENTOS
Hormigón Viejo
Altas prestaciones en trabajos de mantenimiento y reparaciones de hormigones extra duros.
Ø 300, 350 400, 450, 500 y 600
Corte húmedo
ARROW
PRESTRESSED CONCRETE
Grinding
Extra grinding power.
Ø 125, 150 & 180
Dry
ARROW
GENERAL PURPOSE
Grinding Cup Wheels
Epoxy and other hard coatings removal.
Ø 125, 150 & 180
Dry cutting
BC
GENERAL PURPOSE
Non Abrasive Materials
Gres and wall tiles, extraordinary cutting quality.
Ø 180, 200, 230, 250 & 300
Wet cutting
BLT – BLASTRAC
SURFACE TREATMENT
Diamond Segments
Available in grits: 6, 16, 30, 45 and 75.
BOXER FAST
BRIDGE & CNC SAW BLADES
Granite – Quartzite – Engineered Quartz Stone
Maximum speed – Perfect finishes
DOCTO by ADW positioned diamond
Ø350 & 400
Docto Standard, Docto Silent
Wet cutting
BROCA VACUUM
GENERAL PURPOSE
Porcelain and Ultra Compact Surfaces
Ø 5, 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 50, 60, 68, 80, 90, 100 & 120
Dry cutting
CERAMICUT
GENERAL PURPOSE
Porcelain and Ultra Compact Surfaces
High cutting speed on porcelain and ultra-compact surfaces.
Also recommended for marble and other hard non-abrasive materials.
Ø 180, 200, 250, 300, 350 & 400
Wet cutting
CERAMICUT
BRIDGE & CNC SAW BLADES
Porcelain Gres and Large Formats
Ø 180, 200, 250, 300, 350 & 400
CRM-1 and CRM-2
Wet cutting
COMBI
GENERAL PURPOSE
Abrasive Materials
Cured concrete with medium – high abrasion.
Ø 300, 350, 400 & 450
Wet cutting
CONCAVE VACUUM
HANDHELD SAWING
Ultracompact Surfaces
Ø 125
Wet cutting
CONTINUOUS RING
CONCRETE DRILLING
Drilling Jobs
- High productivity, especially in projects that require a fast execution
- Soft / medium hardness
- Optimal in any kind of drill motors
- Roof segment, easy cutting start
- Standard 450 mm tube length and 1/2 gas connection
- Special lengh tubes availables
- Reinforced concrete continuous ring core drill. High performance in several drilling jobs, and specially recommended for chemical anchor holes.
- Ø from 14 to 38 (lengths 450, 1000 & 1500 mm)
- Wet
CRACK CHASER
FLOOR CUTTING
Old Concrete
V-shaped segment design, for clean out and repair cracks and/or imperfections on concrete and stone floors.
Ø 125
Dry and wet cutting
CUTTING & GRINDING
GENERAL PURPOSE
Non Abrasive Materials
Cutting and sanding porcelain and marble with one disc, M-14 trhread connection.
Ø 125
Dry cutting
CUTTING & GRINDING
HANDHELD SAWING
Marble – Limestones
Ø 125
Wet cutting
CUTTING & GRINDING
HANDHELD SAWING
Quartz – Granite
Ø 125
Wet cutting
DEKTOOL
DRILLING
Multi-Materials
Ø 6, 8, 10, 12, 16, 20, 22, 25, 28, 30, 35, 40, 45, 50, 60, 68, 80, 90, 100, 105, 120 & 160
Left hand screw and 5/8” connections available on request.
Wet
DOCTO FINGER BIT
CNC MILLING
Quartz – Granite
Ø 25×35 & 25×48
Wet cutting
DOUBLE ROW SINTER
PRESTRESSED CONCRETE
Grinding
Standard for any type of construction materials.
Ø 100, 125 & 180
Dry
DOUBLE ROW SINTER
GENERAL PURPOSE
Grinding Cup Wheels
Standard for any type of construction materials.
Ø 100, 125 & 180
Dry cutting
DRAINBOARD GROOVING BIT
CNC MILLING
Quartz – Granite
Ø 15 & 20
Wet cutting
DRAINBOARD GROOVING BIT
CNC MILLING
Ultracompact Surfaces
Ø 15 & 20
Wet cutting
EH-10 MARMOFAST
BRIDGE & CNC SAW BLADES
Marble – Limestones
High performance
Ø 300, 350, 400, 450, 500, 600, 625, 700, 725, 800, 825, 850 & 900
Standard and Silent
Wet cutting
ELECTROCUT
GENERAL PURPOSE
Non Abrasive Materials
Gres and wall tiles, extraordinary cutting quality.
Ø 115, 125, 150, 180, 230, 300, 350 & 400
Wet and dry cutting
ELECTROCUT
HANDHELD SAWING
Marble – Limestones
Ø 115, 125, 150, 180 & 230
Wet cutting
Available with Flange Ø22,2 – M-14 & 5/8”
EPIC
GENERAL PURPOSE
Porcelain and Ultra Compact Surfaces
Super professional for porcelain, ultra-compact, and Dekton.
Ø 105, 115, 125, 150, 180, 200, 230, 250 & 300
Wet and dry cutting
EPIC
HAND-HELD CUTTING
Ultracompact Surfaces – Porcelain Gres
Ø 105, 115, 125, 150, 180, 200, 230, 250 & 300
Wet cutting
Ø 125 Available with Flange M-14 & 5/8″
F-10 HIP
CONCRETE DRILLING
Drilling Jobs
- Long life on hard aggregates.
- Hard quality
- High performance on abrasive materials
- Needs 3.000W or three phase motor to optimize the performance.
- Ø from 52 to 300 (lengths 500, 1000 & 1500 mm)
- Wet cutting
F-5 POINT DOCTO
CONCRETE DRILLING
APPLICATION:
- Soft to medium aggregates with high reinforcement
- Hard stones
- High speed on soft aggregates with high reinforcement, also in Granite.
- Ø from 42 to 600 (lengths 500, 1000 & 1500 mm)
- Wet cutting
- Soft/medium hardness
- Optimal in any kind of drill motors
F-7 POINT DOCTO
CONCRETE DRILLING
- Drilling Jobs
APPLICATION
- Hard aggregates with high reinforcement
- Soft/Abrasive concrete
Medium/hard hardness
High speed on soft to médium aggregates with high reinforcement.
Optimal in any kind of drill motors.
Ø from 42 to 300 (lengths 500, 1000 & 1500 mm)
Wet
FLINTEX EVO
FLOOR CUTTING
Fresh Concrete
Extra hard and/or abrasive aggregates on 13 to 30HP road cutters.
Ø 300 & 350
Wet cutting
FS-4 DOCTO
PRESTRESSED CONCRETE
Special Cuts
Special cuts in Floor Cutters.
Ø 600, 700, 800 & 900
Wet cutting
FS.4 DOCTO
FLOOR CUTTING
Old Concrete
- 7,5 ~ 15 kW Floor Saws.
- Extra soft hardness
- Very fast cutting
- Ø 600, 700, 800, 900, 1000 & 1200
- Wet cutting
FS.5 DOCTO
FLOOR CUTTING
Old Concrete
Hard stones
- 15 ~ 22 kW Floor Saws.
- Soft / medium hardness
- Optimal in any kind of drill motors
- Ø 600, 700, 800, 900, 1000 & 1200
- Wet cutting
FS.6 DOCTO
FLOOR CUTTING
Old Concrete
- 22 ~ 40 kW Floor Saws.
- Medium hardness
- Fast cutting
- Ø 600, 700, 800, 900, 1000 & 1200
- Wet cutting
FS.7 DOCTO
FLOOR CUTTING
Old Concrete
- 40 ~ 55 kW Floor Saws.
- Medium / hard hardness
- High speed
- Optimal in any kind of drill motors
- Ø 600, 700, 800, 900, 1000 & 1200
- Wet cutting
FS.8 DOCTO
FLOOR CUTTING
Old Concrete
- 50 ~ 65 kW Floor Saws.
- Extra hard quality
- High speed
- Ø 600, 700, 800, 900, 1000 & 1200
- Wet cutting
HY+
CONCRETE CUTTING
Wall Saw Wire
- Last generation hybrid bead
- Security spring between beads
- Natural rubber with high torsional strenght
- High speed and performance
- Use on 15 to 25 kW Hydraulic power packs or 22 to 30 kW HF power packs
- Ø 10.5
- Wet cutting
HYBRID PAD Ø76
SURFACE TREATMENT
Intermediate and Final Polishing
Ø76 Diamond Pad
- Hybrid resin/metal alloy, 10 mm diamond height.
- Dry or wet use, high performance.
- Intermediate-stage polishing, high abrasive power.
- Available in grits: 50, 100, 200 and 400.
IKON MILLING WHEEL
MILLING AND GROOVING
Porcelain and Ultra Compact Surfaces
Ø 300, 350 & 400
Wet cutting
iKon V25 Silent Plus
BRIDGE & CNC SAW BLADES
Ultracompact Surfaces – Porcelain Gres
Extremely fast cutting, even at low RPM
Ø 300, 350, 400 & 450
Silent Plus
Wet cutting
iKon V25 Silent SW
BRIDGE & CNC SAW BLADES
Ultracompact Surfaces – Porcelain Gres
Extremely fast cutting, even at low RPM
Ø 300, 350, 400, 450 & 500
Silent SW
Wet cutting
iKon V25 Silent SW Step
BRIDGE & CNC SAW BLADES
Ultracompact Surfaces – Porcelain Gres
Extremely fast cutting, even at low RPM
Ø 300, 350, 400 & 450
Silent SW Step
Wet cutting
iKon V25S Silent SW Step
FIXED MACHINES
Ultracompact surfaces
Extreme fast cutting, even at low RPM
Ø 350, 400 y 450
Silent SW
Wet cutting
INCREMENTAL ROUTER CONT
CNC MILLING
Ultracompact Surfaces
Ø 8×10, 10×10 & 20×10
Wet cutting
INCREMENTAL ROUTER SGM
CNC MILLING
Quartz – Granite
Ø 20×24
Wet cutting
INCREMENTAL ROUTER SGM
CNC MILLING
Ultracompact Surfaces
Ø 20×24
Wet cutting
JOKER
BRIDGE & CNC SAW BLADES
Multi-Materials
A single blade for all materials
High cutting speed and excellent finishes
Ø 350, 400, 450 & 500
Silent
Wet cutting
JUMBO FAST
BRIDGE & CNC SAW BLADES
Granite – Engineered Quartz Stone
Maximum speed – Perfect finishes
DOCTO by ADW positioned diamond
Ø 300, 350, 400, 450, 500 & 600
Docto Silent and Docto Standard
Wet cutting
JUMBO-V
BRIDGE & CNC SAW BLADES
Quartzite
Maximum speed – Perfect finishes
DOCTO by ADW positioned diamond
Ø 350, 400 & 450
Silent
Wet cutting
LAGUNA
FLOOR CUTTING
Joint Grooving
- Medium to soft aggregates with high power road machines.
- Soft/medium hardness
- High productivity
- Use on 40/65 kW floor saws
- Ø 350 & 500
- Wet cutting
LAGUNA
FIXED MACHINES
Sandstone-Travertine
High performance
Ø 300, 350, 400, 450, 500, 600, 625, 700, 725, 800, 825, 850, 900 y 1000
Standard & Silent
Wet cutting
LAGUNA CHAMFERING BLADE
FLOOR CUTTING
Joint Chamfering
- Standard on low / medium power road cutters.
- Ø 250 (x2 units) & 350 (x2 units)
- Wet cutting
LAGUNA PLUS
PRESTRESSED CONCRETE
Standard Cuts
Very fast cutting and long life, on soft and medium aggregates.
Ø 600, 700, 800, 850, 900, 1000, 1100, 1200, 1300, 1350, 1450 & 1700
Standard and Silent
Wet cutting
LASER-E 10
FLOOR CUTTING
Old Concrete
Standard on old concrete. Recommended for rental companies.
Ø 300 & 350
Wet cutting
LASER-E 10
GENERAL PURPOSE
Bricks, blocks and soft to medium concrete products. Premium quality.
Ø 115, 125, 180, 230, 300 & 350
Dry and wet cutting
LASER-G PLUS
GENERAL PURPOSE
Hard Materials
Standard for natural Granite and hard materials.
Ø 115, 125, 150, 180 & 230
Dry cutting
LASER-G PLUS
HANDHELD SAWING
Quartz – Granite
Ø 115, 125, 150, 180 & 230
Wet cutting
Available with Flange Ø 22,2 – M-14 & 5/8”